Step 1: Load Your Model in MakerBot Print MakerBot Print can be downloaded for free. In order to properly process and print your 3D model you will need to use the MakerBot Print software interface. Please note that you must provide your own filament material. ![]() The MakerLab does not charge for the use of our two self-service 3D printers. Self-service 3D printing is not available when the Cline Library is closed. Users must monitor their 3D prints when using the library's self-service printers. The time required to print a 3D model varies widely and depends on the size and complexity of the design, as well as your requested print settings such as resolution and infill. When 3D printing using the MakerLab our recommended resolution is 0.2 mm with a maximum resolution of 0.1 mm.įor 3D printing, the density of your model is determined by the infill percentage. When 3D printing using the MakerLab our recommended infill percentage is 10%, however this can be increased up to 95%. Thinner layers will result in cleaner and more precise final models. ![]() The maximum print size that the MakerLab's self-service 3D printers can accommodate is 9.92" x 7.83" x 5.9”.įor 3D printing, resolution is measured by the thickness of the layers being printed. Please note that unless you purchase MakerBot brand filament you will need to re-roll your filament on one of our MakerBot-compatible filament spools. The self-service printers are compatible with 1.75mm rolls of PLA (Polylactic Acid) 3D printing filament. The MakerLab has two MakerBot Replicator v5 FDM printers available for self-service 3D printing on a first-come, first-served basis.ģD printing filament is not provided for the MakerLab's self-service 3D printing - users will need to provide their own material.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |